I need to know how to solve this problem. This didn't happen with older versions of the software. Sometimes, because I make multiple copies of a CD, that takes several tries, AND wastes lots of sheets and ink. What I've been doing is to just print on the Memorex sheets until I get the desired results. Most of the time (about 95%), every other print is correct, with every other print too high. USUALLY, the first print goes exactly where it's supposed to on the sheet then, the next one prints too high. Sometimes, the Disc graphic will print out exactly where it's supposed to on the sheet sometimes it is from about 1/4 to 1/2 inch too high on the sheet. After much trial and error, I was able to configure the Alignment after clicking 'Print' so that the 'Disc' printing on those sheets was aligned correctly. I long ago configured the File:Edit Paper/Printer Templates for the Memorex 3-in-1 Full-Faced CD sheets. I don't know exactly with which version this problem started, but I can't fix it. I've been using Acoustica CD/DVD Label Maker for quite a few years.
